|Portable PUF Panel Cabin| Size: 25 x 10 x 9 ft MS Structure: The base frame shall be made of pressed mild steel channel section of 75 x 40 C channel. Strong grid pattern of 2 x 2 shall be provided by C section to avoid deflection. The vertical Column and Roof shall be made using 50 x 50 x 3 mm thick square pipe. FLOOR: The floor shall be made with 18 mm thick Cement sheet shall be covered with PVC vinyl carpet. PUF INSULATED WALL & amp; ROOF: The insulated walls shall be made of 50mm thick Sandwich panels covered by GI sheet profile. The sandwich panels shall be made out of 0.5mm PPGI sheet and Roof shall be made of 30mm thick sandwich panel. Roof shall have single side slope DOOR: 2.1M H * 1.5 Mtr W * 50MM The door frame shall be made out with aluminum powder coated frame. The door shall be made from 50mm thick puf sandwich panel. WINDOWS: 6 nos having size: 4 x 3 ft Two Track Glass Sliding Windows with separate Aluminum anodized frame and with 4MM thick clear glass. ELECTRIFICATION: The Unit shall be completed with all the electrical fittings with Casing Capping System on Wall. Electrical wiring of RR Kabel/Anchor or equivalent make with Switch/Sockets. Light Points – 3 Nos. With LED Tube Lights and 1 Bulkhead light for outside of cabin Fan Points – 3 No. round cabin fan. 5 Amp Socket – 2 Nos 15 Amp AC point with MCB- 1 No. AC Outdoor unit stand outside cabin-1 No. Partition: One partition shall be made of puf sandwich panel. Partition shall have 3 x 7 ft size of sliding door. 2 nos washbasin with SS tape, drainage pipe and necessary plumbing. |Manufacturer of Portable PUF Panel Cabin in Nandesari-Vadodara| We also supply portable puf panel cabin at all over Gujarat-India.