|PORTABLE TOILET| Size: 4 x 4 x 8.5 ft BASE FRAME: The base frame shall be made of pressed mild steel channel section of C channel for outer frame ISMC and for cross section Strong grid pattern of shall be provided by C section to avoid deflection. BASE FRAME: The base frame shall be made of pressed mild steel channel section of C channel for outer frame ISMC and for cross section. Strong grid pattern of shall be provided by C section to avoid deflection TOP FRAME & ROOF: The top frame shall be made using outer c channel, square pipe, angle, etc. Self-draining type of roof shall be provided by using plain GI sheets. Self-draining type roof shall have both side slope. SIDE AND END WALLS: The side and end frame shall be made out of pressed sections of suitable profiles of sufficient strength. Steel sheet shall be continuously welded at the top and bottom of the entire structure to offer better strength to weight ratio. All gaps shall be sealed at edges, seams, bottom etc. to prevent ingress of moisture. Exterior wall shall be made up of GI sheets, Interior wall is made from Bakelite Sheet/Phenolic Sheet which is 100% water proof. PAINTS: Inside of cabin 1 coat of red oxide and outer side 1 coat red oxide with 2 coats of synthetic enamel paint. INSULATION: 50 mm thick Rockwool insulation at side wall & celling. FLOORING SYSTEM: In flooring 12mm thick cement sheet is covered with green marble. Door: GI Insulated door Electrical: Concealed wiring with light inside , exhaust fan, outside bulkhead lights. Accessories: 1 western WC, 1 washbasin, 1 water tank with necessary plumbing facility and waste water outlet. Manufacturer of Portable Toilet in Nandesari-Vadodara. We also supply portable toilets in all over Gujarat-India.