|MS Portable Cabin| Size: 10 x 8 x 8.5 ft BASE FRAME: The base frame shall be made of pressed mild steel channel section of C channel for outer frame ISMC and for cross section Strong grid pattern of 2 x 2 shall be provided by C section to avoid deflection CORNER POST: made by c section box TOP FRAME & amp; ROOF: The top frame shall be made using outer c channel, square pipe, angle, etc. Self-draining type of roof shall be provided by using 1.2 mm plain GI sheets. Self-draining type roof shall have both side slope. SIDE AND END WALLS: The side and end frame shall be made out of pressed sections of suitable profiles of sufficient strength. Steel sheet shall be continuously welded at the top and bottom of the entire structure to offer better strength to weight ratio. All gaps shall be sealed at edges, seams, bottom etc. to prevent ingress of moisture. Exterior wall shall be made up of 1.2 mm GI specially corrugated sheets, Interior wall is made from PVC sheet PAINTS: Inside of cabin 1 coat of red oxide and outer side 1 coat red oxide with 2 coats of epoxy paint. INSULATION: 50 mm thick Rockwool insulation at side wall & amp; 30 mm thick thermocole insulation in celling FLOORING SYSTEM: In flooring 18 mm thick cement sheet covered with vinyl carpet VENTILATION SYSTEM: 2 nos. of aluminum sliding window with safety grill DOOR: The main insulated door shall be external opening type with weather shadow. ELECTRICALS: All electric wiring shall be concealed having 2 nos LED lights inside cabin, 1 bulk head outside cabin, 1 cabin fan and 1 exhaust fan. |Manufacturer of MS Portable Cabin in Nandesari-Vadodara|