|PORTABLE CONFERENCE ROOM| Size: 20 x 08 x 8.5 ft BASE FRAME: The base frame is made of pressed mild steel channel section of C channel for outer frame ISMC and for cross section Strong grid pattern of 2 x 2 is provided by C section to avoid deflection TOP FRAME & ROOF: The top frame is made using outer c channel, square pipe, angle, etc. Self-draining type of roof is provided by using plain GI sheets. Self-draining type roof having both side slope. SIDE AND END WALLS: The side and end frame is made out of pressed sections of suitable profiles of sufficient strength. Steel sheet is continuously welded at the top and bottom of the entire structure to offer better strength to weight ratio. All gaps are sealed at edges, seams, bottom etc. to prevent ingress of moisture. Exterior wall is made up of GI specially corrugated sheets, Interior wall is made from laminated sheet. PARTITION: 1 partition is made from same as wall material. PAINTS: Inside of cabin 1 coat of red oxide and outer side 1 coat red oxide with 2 coats of synthetic enamel paint. INSULATION: 50 mm thick Rockwool insulation at side wall & in celling FLOORING SYSTEM: In flooring 18 mm thick cement sheet is covered with pvc vinyl carpet VENTILATION SYSTEM: 4 nos. of aluminum powder coated sliding window with safety grill DOOR: 2 nos The insulated door is external opening type with weather shadow . ELECTRICALS: All electric wiring is concealed with 6 nos of LED lights, 4 nos wall mounted cabin fans, bulkhead light outside of cabin, extra plug points. FURNITURE : 1 no conference table having length 10 ft with drawers, 5 nos of revolving chair. Manufacturer of Portable Conference Room in Nandesari-Vadodara. We also supply Portable Conference Room all over Gujarat-India.